MIL-DTL-D38999 Series 1
MIL-DTL-38999 Series I is a bayonet coupling subminiture configuration with high contact density, ideal for smaller wire gauge, general-purpose applications. These environmentresisting connectors are 100% “scoop-proof.” Pins are recessed in elongated shells to prevent the possibility of bending contacts when plugs are scooped into the mating receptacles.
Shell Type
- 27466 = Front, wall mount receptacle = 166 (Aero p/n)
- 27467 = RFI grounding plug = 167 (Aero p/n) 27468 = Jam nut receptacle = 168 (Aero p/n)
- 27496 = Front, box mount receptacle = 196 (Aero p/n)
- 27505 = Rear, box mount receptacle = 105 (Aero p/n)
- 27656 = Rear, wall mount receptacle = 156 (Aero p/n)
Class T = (MS27466, MS27467, MS27468 & MS27656)
- E = Same as T in line above but is not approved for new design (E-nut is not included)= No acc. thread, box mount (MS27496 & MS27505)
Shell Size
9, 11, 13, 15, 17, 19, 21, 23 or 25
Finish (Material & Plating)
- A = Aluminum shell, silver to light iridescent yellow color (bright) cadmium over nickel base
- B = Aluminum shell, olive drab cadmium over electroless nickel base
- F = Aluminum shell, electroless nickel finish
- S = Stainless steel shell, passivated (Aero p/n only)
Contact Style
- P = Pin
- S = Socket
- A = Pin connector less pins (with intent to use non-standard pin contacts)
- B = Socket connector less sockets (with intent to use non-standard socket contacts)
Polarization (Keying)
- N = Normal (Omitted in part number)
- A, B, C, or D (B & C keyways are not available in shell size 9)
Modification (applies to Aero part numbers only)
- 01 = Less contacts (is not marked on the part)
- 340 = Connector kitted with M85049/27-XXX E-nut
- 341 = Connector kitted with M85049/49-2-XXX straight clamp
- 342 = Connector kitted with M85049/47XXX right angle clamp Consult factory for other modifications
For detail information about the products, you can send an e-mail to info@adozmuhendislik.com.
