Microwave blind spot detection
Specification
- Working frequency: 24.0-24.25GHz
- Transmitting power: 15dBM
- Detection angle: 40Degrees
- Detection Capacity: 5 objects at the same time.
- Detection range: 0.55Km/h-220Km/h
- Detection accuracy: <0.55km/h
- Detection direction: objects close by (either getting close, or pass by)
- Detection distance: 0-25m
- Working voltage: 9-24V(can customize 9-35v)
- Working current: <200mA
- Working temperature: -40°C~85°C
Working Mode & Alarming Mode
Working Mode:
- System begin to work when car speed exceeds
30Km/h
- When turning light is on, the corresponding
sensor begin to work.
Alarming Mode:
If there is object within 20 meters from the sensor, and getting closer to the sensor (faster
then our car).
Technical Comparison:
- Microwave:
–Valid for moving objects
–By intelligent software configuration, can obtain target car moving speed, and thus judge whether it can cause danger to our car.
–Far detection distance, so can give warning much earlier.
–Installed inside car bumper, no need to drill holes.
–Strong anti-interference: Heavy rain, fog, snow nearly has no influence to its performance.
Ultrasonic:
–Valid for anything in range
–Give warning if any object in range.
–Can’t differentiate isolation strip, vehicle, or other object, thus can’t detect real danger, and with lots of false alarm.
–Short detection distance (around 3m), not easy to detect fast passing by object.
–Need to drill hole on bumper, influence car appearance.
For detail information about the products, you can send an e-mail to info@adozmuhendislik.com.