POWERCORE – POWER MANAGEMENT UNIT
Güç Yönetim Birimi sistemin beynidir. Switch veya klavyelerden istekleri alır ve bu komutları sistemin mevcut durumuna göre işler. Çıkış, bir devrenin etkinleştirilmesi/devre dışı bırakılması, bir zamanlayıcı işlevinin başlatılması veya anahtarsız çalıştırmalı bir sistemde sistemin kilitlenmesi veya kilidinin açılması olabilir. PowerCore daha sonra LED göstergelerini ve arka aydınlatmayı açmak/kapatmak için sistemden klavyelere durum verilerini gönderir.
Blink Marine, çıkış sayısı ve elektriksel özellikler açısından farklılık gösteren üç farklı Güç Yönetim Birimi sağlar. Daha fazla bilgi için belgelere göz atın veya bizimle iletişime geçin.
PC-10
PC 10 ELECTRICAL FEATURES
- – 12V or 24V nominal input voltage
- – 100A total PME input current carrying capability
- – 12 switched circuits that include:
- – Momentary, toggle, and time-out functions.
- – Pulse-width modulation of output voltage for dimming capability.
- – 3 circuits rated up to 20A maximum continuous load, 9 circuits rated up to 15A.
- – 2 complete H-Bridge circuits for driving reversible motors
- – Parallelable output increases current rating.
- – An electronic circuit breaker protects every circuits. The current ratio for each circuit can be set independently.
- – Remote reset of any output circuitry fault through keypad.
- – Input undervoltage lock down.
PC-20
- PC 20 ELECTRICAL FEATURES
- – 12V or 24V nominal input voltage
- – 150Ampere total PME input current carrying capability
- – 22 switched circuits that include:
- – Momentary, toggle, and time-out functions.
- – Pulse-width modulation of output voltage for dimming
capability. - – 5 circuits rated up to 20A maximum continuous load, 17
circuits rated up to 15A. - – 4 complete H-Bridge circuits for driving reversible motors
- – Parallelable output increases current rating.
- – An electronic circuit breaker protects every circuits. The current
ratio for each circuit can be set independently. - – Remote reset of any output circuitry fault through keypad.
- – Input undervoltage lock down.
PC21B
PC21B ELECTRICAL FEATURES
- – 12V or 24V nominal input voltage
- – 150 Ampere total PME input current carrying capability
- – 22 switched circuits that include:
- — Momentary, toggle and time-out functions
- — Pulse-width modulation of output voltage for dimming capability on 3 circuits
- — 22 circuits, each rated up to 15A
- — 2 complete H-Bridge circuits for driving reversible motors
- — Parallel output capability to increase current rating
- – An electronic circuit breaker protects every circuit. The current ratio for each circuit can be set independently
- – Remote reset of any output circuitry fault through keypad
- – Input undervoltage lock down
PC10-SR
PC 10-SR ELECTRICAL FEATURES
The main difference from other products in the PC series is the presence of a single connector Deutsch DRC13-24PA that makes PC10-SR a plug and play replacement for previous generation EIM relay module (DSS / DNA).
ELECTRICAL FEATURES
- – 12V or 24V nominal input voltage
- – 100Ampere total PME input current carrying capability
- – 10 switched circuits that include:
- – Momentary, toggle, and time-out functions.
- – Pulse-width modulation of output voltage for dimming capability.
- – 2 complete H-Bridge circuits for driving reversible motors
- – Parallelable output increases current rating.
- – An electronic circuit breaker protects circuits. The current ratio for each circuit can be set independently (10 switched circuits).
- – Remote reset of switched circuits fault through keypad.
- – Input undervoltage lock down.
Detaylı bilgi için info@adozmuhendislik adresine mail iletebilirsiniz.